This Article Introduces the Removal and Installation of the Electromagnetic Pump Filter of the Excavator Isuzu EFI diesel Engine



         This article introduces the removal and installation of the electromagnetic pump filter of the excavator Isuzu EFI diesel engine
11.2022 ISUZU E-IDSS Diagnostic Software Download and Installation Service

① Remove the connector (1 in Figure 4-10).

ISUZU US-IDSS Diagnostic Service II Truck Diagnostic System 11.2022

② Use pliers or other tools to loosen the hose cable ties (2 in Figure 4-11), and then remove the hose (3 and 4 in Figure   4-11). Cover the electromagnetic pump filter and hose with caps to prevent water, dust, or dirt from entering.

③ Remove the two mounting bolts with a wrench (10mm) (5 in Figure 4-12), then turn the filter cover to the left (Figure 4  -)  7 in 13) Remove the filter element (6 in Figure 4-13).

Isuzu G-IDSS Diagnostic Service System 03.2023 Download and Installation Service