Description
VAG EEPROM Programmer V1.19g Features:
Languages:Dansk,Deutsch,English,Romana
OS Requires:Win 7,Win 8 and Win 10
No Need Installation
Compatible Interface:KKL interface(blue),k-line,VAG409.1(5051B)
Only work for VDO
How to Use VAG EEPROM Programmer 1.19g：
1.Open .bin file. Write EEprom (Encrypted). Hopefully this clears the error and you can continue.
2.Set Newmode. In this mode, you can read SKC if you Read EEprom (Decrypted).
3.Convert current mileage into kilometers. Enter in lower right box.
4.Set Kilometer.
5.Set Back to Adapted Again.
Vag Eeprom Programmer V1.19
6.Go through VCDS to adapt. SKC for new cluster is 01412.
VAG EEPROM Programmer 1.19g Feebacks:
Feedback 1:
For VCDS software,please run VCDS go to settings and make HEX-CAN USB Interface to normal KKL, there is setup for that.
Feedback 2:
Remember port setting,and this only work on VDO.
