Description
Scania XCOM v2.30 Download, Install and Manual
Scania XCOM – is a diagnostic tool to read, save and modify ECU data such as trouble codes, parameters, statistic data etc. VCI2/VCI3 interface is used to connect to ECU via CAN protocol.
0.S.:Windows XP;Windows Vista;Windows 7;Windows 8
Version:2.3
Language: English
Support multiple computer installation
Scania XCOM Support Functions:
Read stored fault codes and Freeze Frames.
Clear inactive fault codes.
Read information about stored working cycles.
Measure internal variables such as the engine speed, pressure, temperature and save.
Program certain parameters AdBlue ON/OFF.
EGR ON/OFF.
Chassis ID/VIN Change.
Immobilizer ON/OFF.
TruCk Power INCREASE.
ECU Recovery.
ECU Reset.
ECU Unlock without PIN.
Scania XCOM Support System: EMS-Engine management system.
GMS-Gearbox management system.
RET-Retarder system.
AWD-All wheel drive system.
CLS-Clutch Control.
EEC-Exhaust Emission Control.
COO(COO7)-Coordinator.
BWS(BCI1)-Bodywork system.
