How to Remove Cummins M11 Turbocharger and Oil Return Pipe



This article mainly introduces how to disassemble the Cummins M11 turbocharger and the oil return pipe.
 
  ① Remove the oil supply pipe and sealing gasket from the top of the turbocharger, remove the other end 
 
of the oil supply pipe from the oil filter seat, and then remove the oil return pipe and sealing gasket from 
 
the bottom of the turbocharger, see Figure 2-22. 
 
 ② Remove the V-shaped clamp, exhaust elbow and O-ring from the exhaust port of the turbocharger 
 
compressor, remove 4 mounting nuts, remove the turbocharger and gasket, and block the supercharger
 
  For 
 
the oil supply hole and oil return hole, see Figure 2-23. 
 
 
③ Remove the turbocharger oil return pipe joint, see Figure 2-24.