this article introduces the disassembly of Doosan DL350-5 loader Engine Connection-Converter
1. Remove lock plate and loosen hex head screws.2. Remove disk and pry drive flange off shaft.
Doosan Diagnostic Tool UVIM Support Doosan Excavators High Quality
1. Remove lock plate and loosen hex head screws.2. Remove disk and pry drive flange off shaft.
Doosan Diagnostic Tool UVIM Support Doosan Excavators High Quality
3. Loosen screw connection.
NOTE: Mark radial installation position of housing
cover.
4. Separate converter, along with cover from the
transmission,using lifting device.
(S)Set of eyebolts -5870204002
2023.07 Doosan DMS-5 Data Monitoring System Diagnostic Software
5. Press drive shaft resp.converter out of the cover(ball bearing)
6. Squeeze retaining ring out and remove ball bearing. (S)Set of internal pliers -5870900013
7. Loosen hex head screws and separate diaphragm from the converter.
8. Loosen hex head screws and separate drive shaft from the diaphragm.
9. Remove inductive transmitter (n Engine).
10. Loosen hex head screws and remove converter bell.
Doosan Machine Engine Diagnostic Software Package 2024 One PC Installation
